One of one · Backlit wall art

The grain of one sheet, raised into a landscape.

Each piece starts as a single sheet of plywood. Its own grain lines are traced, cut, lifted to different heights on steel bolts and lit from behind. No two can be alike.

Cut along the grainRaised on steelLit from behind
Diana, seen from the left
Diana
No. 001 · 36 × 24 in · $900
The collection

Made once, sold once.

All pieces
How it is made

The wood draws its own map.

The whole process
  1. 01

    One sheet

    Every piece begins as a single sheet of plywood, photographed flat. Its figure is already a landscape, if you know how to read it.

  2. 02

    Its own lines

    The grain is traced line by line. Those lines, and only those, become the cuts. Nothing is drawn on top of the wood.

  3. 03

    Cut apart

    A CNC router follows each line through the sheet. What was one board is now a set of pieces that only fit one way.

  4. 04

    Raised and lit

    Each piece is lifted to its own height on steel bolts over a backing board, and light is set behind it.

After dark

And then the lights go on.

Behind the raised pieces, warm light spills across the board and out between the cuts. By day it is wood and shadow. In the evening it glows.

See it lit
Diana, with its backlight on
Before it ships

See it on your wall first.

Every piece here has a true-scale 3D model. Turn it in your hand on this page, then stand it on your own wall through your phone.

  • Open a piece on your phone and tap See it on your wall. There is no app to install.
  • It appears at its real size, so you can judge it against the sofa, the window, the ceiling.
  • Step closer. The layers stand off the wall exactly as the finished piece will.
Choose a piece
Made one at a time

Hear when the next is finished.

Each piece is made once and sells once. Leave an email and you will get one short note when the next is ready.